氧化鋁空心球制品圖
本制品采用純氧化鋁空心球，氧化鋁微粉為主要原料，添加適量高溫結合劑，經1750℃高溫燒成。制品具有體積密度小、熱容量小、強度高、封閉氣孔多、抗剝落和熱穩定性好等特點。用作高溫窖爐保溫材料和高溫窖爐內襯。
Alumina Bubble Produvtis sintered at high temperature of 1750℃ and made maily feom pure Alumina Bubble,Alnmina micropowder definife high temprature cement. It has thecharacrers of low bulk density and thermal capacity,high strength, lots of invisible porosit, spalling resistance and good thermal steadiness. Lt is used as the high temperature insulaton material kikn inner liners.
技術指標 Main technical data
|
指標 Index 產品Product |
AQ-0.9~1.1 |
AQ-1.2~1.3 |
AQ-1.4~1.5 |
AQ-1.6~1.8 |
|
Al2O3(%) |
90 |
90 |
90 |
90 |
|
SiO2(%) |
5 |
5 |
5 |
5 |
|
Fe2O3（%） |
0.5 |
0.5 |
0.5 |
0.5 |
|
體積密度（g/cm3）Bulk density |
0.9~1.1 |
1.2~1.3 |
1.4~1.5 |
1.6~1.8 |
|
顯氣孔率(%) Apparent porosity |
69 |
69 |
69 |
69 |
|
常溫耐壓強度（Mpa）Comprssivc strcngth at RT |
20 |
23 |
25 |
28 |
|
0.1Mpa 荷重軟化開始溫度T0.6%(℃) Renforcemenfractoriness under 0.6Mpa load |
1600 |
1700 |
1700 |
1700 |
|
耐火度（℃） Refractoriness |
1650 |
1790 |
1790 |
1790 |
|
熱穩定性1100風熱冷 Thermal steadiness Time |
20 |
20 |
20 |
20 |
|
導熱系數W/M.k(800℃) Heat conduction ratio |
0.7 |
0.7 |
0.8 |
0.9 |
|
用途 Application |
用于石化和陶瓷行業各種室爐，做保溫材料和內襯保溫材料。例：氣化爐，炭黑爐，隧道窯，梭式窯等 Used as in sulation material and inner liners for all kinds of kilns in the industties of petrescence and ceramic like,gasify kiln,Carbon biack kiln bell jar kiln;tunnel kiln and shuttle kin etc. |
本公司專業生產優質氧化鋁空心球制品等特種陶瓷產品，歡迎購買氧化鋁空心球制品產品到湖南株洲湘龍新材料有限公司來！
